Thursday 10 October 2013

How to install USB VCom or MTK drivers for your Tecno And other MTK device


For you to do anything on your MTK device, you need to install MTK drivers and the tutorials

Tools
1)MTK drivers
2)USB Deview
3)PC



Procedure
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC by deleting all MTK drivers you see when you use USB Deview to analyse your system
[2] with phone switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open
[4] connect your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager. (With some MTK6577 Smartphones should be
installed without battery. Please before hand inform.)
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly
[7] PC reboot
[8] Open Device Manager and connect the switched-off Smartphone via USB to the PC(same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry
[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.
This should install it.
Note: the link to the tools required for this and other things is available in android tools post in tips

No comments: